C-SCOPE SG-V Instruction Manual download pdf (Page 15)

Locator Battery Check

Switch the Locator on by pulling up on the On/Off trigger

positioned on the underside of the handle. The Locator

should emit a clear audible battery check tone for one

second and the display should come on.

Check the battery level indicator in the bottom left hand

corner of the display. If there is only one segment or no

segments of the indicator filled in then the batteries will

need to be renewed before locating work can begin.

Changing Locator Batteries

Push the two clips back to release the battery

compartment door. Remove ALL EIGHT used batteries

and replace with new ones. Be careful to insert the new

batteries the correct way round in the holder. Replace the

holder in the battery compartment making sure that the

two terminals on the holder make contact with the two

terminals within the battery compartment. Close the

battery compartment door securely.

Using the Locator: Batteries

WARNING Do not change batteries in confined spaces where gas may be present.

NOTE A spare battery pack can be carried inside the battery compartment.

NOTE Only use alkaline AA (LR6) size batteries. Dispose of the used batteries safely in accordance with

local regulations.

Battery Levels

replace

batteries

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

No comments

C-SCOPE SG-V Instruction Manual Page 15